Create Account; Config Account - D-Link DGS-3100 SERIES Cli Manual

Command
enable dhcp_relay
disable dhcp_relay
config dhcp_relay add
ipi
config dhcp_relay
delete ipif
show dhcp_relay
show tech-support
show environment
Each command is listed in detail, as follows:

create account

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To create an administrator-level user account with the username 'dlink':

config account

Purpose
Syntax
Description
Parameter
<ipaddr>
<ipaddr>
{ipif}
show tech_support [config | memory]
To create user accounts.
create account [admin | oper | user] <username 15>
The create account command creates an administrator, operator,
or user account that consists of a username and an optional
password. Up to 31 accounts can be created. The system prompts
for the account's password, which may be between 0 and 15
characters.
admin − creates an administrator account.
oper − creates an operator account.
user − creates a user account.
<username 1-15> − The account username may be between 1 and
15 characters.
Only Administrator or Operator-level users can issue this command.
DGS3100# create account admin dlink
Enter a case-sensitive password:****
Enter the password again for confirmation:****
Success.
DGS3100#
To change the password for an existing user account.
config account <username 15>
The config account command changes the password for a user
account that has been created using the create account command.
DGS-3100 Series Gigabit Stackable Managed Switch CLI Manual
12