Other Errors - Fuji Xerox ApeosPort-IV C7780 Administrator's Manual

15 Problem Solving

Other Errors

This section describes the remedies when the following messages are displayed.
Error
Message
A fault has occurred.
Switch off the machine.
(xxx-yyy)
Completed with an error.
(xxx-yyy)
A fault has occurred. The
machine has rebooted.
Select [Close]. If the
problem persists, call for
service.
(xxx-yyy)
15
550
[Cause] An error occurred.
[Remedy] Switch off the machine power, make sure that the touch screen is
blank, and then switch the machine power on again.
If the message persists, record the content displayed for [(xxx-yyy)].
Then immediately switch the main power and power off, make sure
that the touch screen is blank, and then contact our Customer Support
Center.
[Cause] An error occurred, and the operation terminated abnormally.
[Remedy] Execute the operation again.
[Cause] An auto-recoverable internal error occurred, and the machine
restarted automatically.
[Remedy] Select [Close]. to use the machine normally. If the error still is not
resolved, contact our Customer Support Center.
Cause and Remedy