Fuji Xerox ApeosPort-IV C7780 Administrator's Manual page 524

15 Problem Solving
Error Code
033-507
033-508
033-509
033-510
033-511
033-512
033-513
033-514
033-516
033-517
033-518
033-519
033-520
033-521
15
033-522
033-523
* If you cannot resolve an error despite following the instructions described in the table, contact our Customer Support
Center. The contact number is printed on the label or card attached on the machine.
524
[Cause] The recipient's machine cannot receive.
[Remedy] Confirm the recipient's machine (memory is full, machine is being
maintained, or other conditions), and execute the operation again.
[Cause] No spooling documents exist at the other machine.
[Remedy] Ask the other party to prepare polling documents, and execute the
operation again.
[Cause] An error occurred during fax transmission.
[Remedy] Execute the operation again. If the error still is not resolved, confirm the
condition of the other machine.
[Cause] An error occurred during fax transmission.
[Remedy] Confirm the condition of the line and the other machine, and execute the
operation again.
[Cause] An error occurred during fax transmission.
[Remedy] Confirm the following conditions:
Whether a polling document exists at the other machine
Whether a document is jammed at the other machine
Whether the passwords match
[Cause] The other party cannot execute Relay Broadcast.
[Remedy] Confirm whether the other party can execute Relay Broadcast.
[Cause] The other machine does not have the Folder feature.
[Remedy] Confirm whether the other machine has the Folder feature.
[Cause] An error occurred during fax transmission.
[Remedy] Ask the sender to send again.
[Cause] An error occurred during fax transmission.
[Remedy] Confirm the recipient, and then execute the operation again. If receiving,
ask the sender to send again.
[Cause] An error occurred during fax transmission.
[Remedy] Execute the operation again. If the error still is not resolved, confirm the
condition of the other machine.
[Cause] The other machine cannot correspond to reception of SUB.
[Remedy] Check whether the other machine can correspond to reception of SUB,
and execute the operation again.
[Cause] The other machine cannot correspond to reception of SEP.
[Remedy] Check whether the other machine can correspond to reception of SEP,
and execute the operation again.
[Cause] The other machine cannot correspond to reception of PWD/SID.
[Remedy] Check whether the other machine can correspond to reception of PWD/
SID, and execute the operation again.
[Cause] An error occurred during fax transmission.
[Remedy] Confirm the condition of the machine (memory is full, paper has run out, or
other conditions), and execute the operation again.
[Cause] An error occurred during fax transmission.
[Remedy] Ask the sender to execute the operation again.
[Cause] The line (Channel 1) is not connected correctly.
[Remedy] Confirm the connection of the line (Channel 1) and connect it correctly,
and then execute the operation again.
Cause and Remedy