Fuji Xerox ApeosPort-IV C7780 Administrator's Manual page 515

Error Code
027-520 [Cause]
[Remedy] Confirm the access privilege to the SMB server.
027-521
[Cause]
[Remedy] Change the file name or forwarding destination folder of the scan server.
027-522
[Cause]
[Remedy] Take one of the following measures:
027-523 [Cause]
[Remedy] Check whether the specified name is being used for another file or folder
027-524
[Cause]
[Remedy] Check whether the specified name is being used for another file or folder
027-525
[Cause]
[Remedy] Check whether the file is not being used by another user at the specified
027-526
[Cause]
[Remedy] If the lock directory (*.LCK) exists in the destination, delete it manually,
027-527
[Cause]
[Remedy] Check whether the file is not being used by another user at the specified
027-528
[Cause]
[Remedy] Check whether the save location has free space.
* If you cannot resolve an error despite following the instructions described in the table, contact our Customer Support
Center. The contact number is printed on the label or card attached on the machine.
Cause and Remedy
The machine failed to transfer data using SMB of the Scan to PC service
because the file name or folder name could not be retrieved.
The machine failed to transfer data using SMB of the Scan to PC service
because the suffix of the name of the file or folder exceeded the limit value.
Or, try moving or deleting the files within the forwarding destination folder.
During forwarding using SMB of the Scan to PC service, the scanned
image file could not be created on the SMB server because of one of the
following reasons:
The specified file name already exists.
The specified file name has already been used.
The specified file name exists as a directory.
Invalid characters are used in the file name.
Check whether the specified file name can be used in the save location.
Check whether the specified file name has been used by another user.
Check whether the specified file name has been used for another file or
folder.
The machine failed to transfer data using SMB of the Scan to PC service
because a folder could not be created on the SMB server. The specified
folder already exists.
on the SMB server.
The machine failed to transfer data using SMB of the Scan to PC service
because a folder could not be created on the SMB server. The specified
folder already exists.
on the SMB server.
During forwarding using SMB of the Scan to PC service, a file could not be
deleted from the SMB server because of one of the following reasons:
The file does not exist.
The file is opened.
The specified file name is being used as a directory.
save location.
The machine failed to delete the lock directory on the SMB server while
transferring data using SMB of the Scan to PC service.
and then execute the operation again.
During forwarding using SMB of the Scan to PC service, a folder could not
be deleted from the SMB server because of one of the following reasons:
The file does not exist.
The directory is not empty.
The specified directory name does not exist.
save location.
The machine failed to transfer data using SMB of the Scan to PC service
because no space is available at the save location on the SMB server.
Error Code
15
515