Paper Jams At The Lever 2A And The Knob 3A When D2 Folder Unit Is Installed; Paper Jams At The Lever 2B And The Knob 2C When D2 Folder Unit Is Installed - Fuji Xerox ApeosPort-IV C7780 Administrator's Manual

Paper Jams at the Lever 2a and the Knob 3a when D2 Folder Unit is Installed

1
Make sure that the machine has stopped
before opening the right cover of the finisher.
2
Move the lever 2a and turn the knob 3a to
the left. Remove the jammed paper.
Note • If paper is torn, check for any torn pieces
3
Return the lever 2a to the original position.
4
Close the finisher right cover.
Note • A message will be displayed and the machine will not operate if the front cover of the finisher

Paper Jams at the Lever 2b and the Knob 2c when D2 Folder Unit is Installed

1
Make sure that the machine has stopped
before opening the right cover of the finisher.
2
Move the levers 2b and turn the knob 3a to
the right. Remove the jammed paper.
Note • If paper is torn, check for any torn pieces
of paper inside the machine.
is even slightly open.
of paper inside the machine.
Paper Jams
15
581