Paper Jams At The Lever 3B And 3D - Fuji Xerox ApeosPort-IV C7780 Administrator's Manual

15 Problem Solving
3
Return the lever 1b to the original position.
4
Close the finisher left cover.
Note

Paper Jams at the Lever 3b and 3d

1
Make sure that the machine has stopped
before opening the right cover of the finisher.
2
Move the levers 3b and 3d, and remove the
jammed paper.
Note
3
Return the lever 3b and 3d to the original
position.
4
Close the finisher right cover.
15
Note
578
• A message will be displayed and the machine will not operate if the front cover of the finisher
is even slightly open.
• If paper is torn, check for any torn pieces
of paper inside the machine.
• A message will be displayed and the machine will not operate if the front cover of the finisher
is even slightly open.