Fuji Xerox ApeosPort-IV C7780 Administrator's Manual page 527

Error Code
033-563 [Cause]
[Remedy] Take one of the following measures:
033-564 [Cause]
[Remedy] Wait for a while, confirm the fax service settings and the fax number, and
033-565
[Cause]
[Remedy] Wait until the number of jobs awaiting transmission decreases, or reduce
033-566
[Cause]
[Remedy] Correctly specify the recipient's fax number.
033-567 [Cause]
[Remedy] Correctly enter the recipient's fax number, and execute the operation
033-568
[Cause]
[Remedy] Execute the operation again. If receiving, ask the sender to send again. If
033-569
[Cause]
[Remedy] Load paper in Tray 5 according to the direction displayed on the screen.
033-570 [Cause]
[Remedy] Wait for a while, confirm the Fax service settings and the fax number, and
033-571 [Cause]
[Remedy] Cancel the fax data in the queue, or wait for a while, and execute the
033-572 [Cause]
[Remedy] No measure is required. The data will be printed after a while.
033-573
[Cause]
[Remedy] Take one of the following measures:
033-574
[Cause]
[Remedy] Specify an available line.
033-575 [Cause]
[Remedy] Execute the operation again.
033-576
[Cause]
[Remedy] Enter a correct fax number, and execute the operation again.
033-577 [Cause]
[Remedy] Execute the operation again.
033-578
[Cause]
[Remedy] Confirm the status of the line and the recipient machine, and then ask the
* If you cannot resolve an error despite following the instructions described in the table, contact our Customer Support
Center. The contact number is printed on the label or card attached on the machine.
Cause and Remedy
Paper that can print faxed documents is not loaded in a tray.
Specify the paper size.
Confirm whether the paper tray is set correctly.
The machine was turned off during communication.
then send again if sending. If the error still is not resolved, contact our
Customer Support Center.
Cannot send because too many recipients are specified.
the number of recipients, and then send again.
Cannot send because the recipient (fax number) is not specified.
The recipient (fax number) is incorrect.
again.
An error occurred during fax transmission.
the error still is not resolved, contact our Customer Support Center.
Paper in the tray is not loaded in the direction that the received fax data
can be printed.
The machine was turned off during communication.
then send again if sending. If the error still is not resolved, contact our
Customer Support Center.
Cannot use the Fax service because of causes such as memory is
insufficient.
operation again.
The data received is not printed.
Attempted to send an IP fax (SIP) to the recipient (domain) that
transmissions are not permitted.
Confirm the recipient and re-specify a recipient.
Check the setting for Block Domains and re-specify a recipient.
An unavailable line is specified.
An error occurred during fax transmission.
The recipient (fax number) is incorrect.
An error occurred during fax transmission.
An error occurred during fax receiving.
sender to send again.
Error Code
15
527