Error Code - Fuji Xerox ApeosPort-IV C7780 Administrator's Manual

Error Code

This section describes error codes.
An error message and error code (∗∗∗-∗∗∗) are displayed on the touch screen if printing
terminated abnormally because of an error, or a malfunction occurred in the machine.
For faxing, an error code is also displayed on an Activity Report and a Transmission
Report - Job Undelivered.
Refer to the error codes in the following table to resolve problems.
Important • If an error code is displayed, any print data remaining in the machine and information stored
If an error code is displayed that is not listed in the following table, or if you cannot
resolve an error despite following the instructions described in the table, contact our
Customer Support Center. The contact number is printed on the label or card attached
to the machine.

Error Code

002-770
[Cause]
[Remedy] Delete unnecessary data from the hard disk to free up disk space.
* If you cannot resolve an error despite following the instructions described in the table, contact our Customer Support
Center. The contact number is printed on the label or card attached on the machine.
in the machine's memory is not secured.
Unable to process the job template because of insufficient hard disk
space.
Cause and Remedy
Error Code
15
469