Fuji Xerox ApeosPort-IV C7780 Administrator's Manual page 232

5 Tools
Enter Twice
Re-entering the group recipient is required.
Broadcast Checkbox on 1st Tab
Specify whether or not to show the [Enable Broadcast] checkbox in the [Fax/Internet Fax]
screen to explicitly express broadcast directions.
Manual Redial List - Saved Entries
Specify the number of redial destinations saved.
Manual Redial List - Dial Mode
Specify the destination type saved as a redial destination number.
When you deselect all the check boxes, the Redial feature becomes disabled.
Transmission Header Text - Polling
Set whether or not to attach a transmission header to a polling file.
A polling is the function that a document is stored in the machine's public folder for polling,
and can then be sent by an operation from the other party.
Polled Files - Auto Delete
Set whether or not to automatically delete a polling file after transmission.
5
Rotate 90 degrees
Set whether or not to automatically rotate a document if its image must be reduced in size
unless it is rotated.
Note
Sender ID
For G3 communications, you can select whether to notify G3-ID to recipients.
Save Undelivered Faxes
Set whether or not to save a fax document if a fax transmission fails. When [Yes] is selected,
the [Undelivered Faxes] button appears on the [Secure Print Jobs & More] tab of the [Job
Status] screen. Select this button to send the fax document again.
For details on Undelivered Faxes, refer to "12 Job Status" > "Printing and Deleting Stored Jobs" >
"Undelivered Faxes" in the User Guide.
Save Deleted Faxes
When [Yes] is selected for [Save Undelivered Faxes], set whether or not to save cancelled
faxes.
Saved Faxes - Auto Delete
When [Yes] is selected for [Save Undelivered Faxes], set whether or not to automatically
delete saved faxes in 24 hours.
Transmission Interval
Specify a value for the interval between the end of one transmission and the beginning of the
next, from 3 to 255 seconds in 1 second increments.
A longer transmission interval increases the total time to send a broadcast transmission, but
allows calls to be received during the standby time.
232
• If an arbitrary magnification is specified in [Reduce/Enlarge], the Rotate 90 Degrees feature
does not function.