14 Authentication and Accounting Features
Configuration for Account Administration
This section describes the settings to use the Accounting feature on the machine.
The following shows the reference section for each procedure.
Step 1 Selecting an Accounting Type
The following describes the configuration procedures to use the Accounting feature.
Note
1
Press the <Log In/Out> button.
2
Enter the system administrator's user ID with the numeric keypad or the keyboard
displayed on the screen, and select [Enter].
When a passcode is required, select [Next] and enter the system administrator's
passcode, and select [Enter].
Note
3
Select [Tools] on the [Services Home] screen.
4
Select [Accounting].
5
Select [Accounting Type].
6
Select an accounting type, and then select [Save].
Note
For information on the accounting types, refer to "Accounting Type" (P.278).
7
Select [Close] repeatedly until the [Tools] screen is displayed.
8
Select [Close].
Step 2 Registering User Information
14
1
Press the <Log In/Out> button.
2
Enter the system administrator's user ID with the numeric keypad or the keyboard
displayed on the screen, and select [Enter].
When a passcode is required, select [Next] and enter the system administrator's
passcode, and select [Enter].
Note
3
Select [Tools] on the [Services Home] screen.
414
Step 1 Selecting an Accounting Type .......................................................................................414
Step 2 Registering User Information ........................................................................................414
• For information on relationships between the Authentication and Accounting modes, refer to
"Authentication and Accounting Relationship" (P.390).
• The default user ID is "11111".
• The default passcode is "x-admin".
• You can select the accounting type from [Local Accounting], [Network Accounting], and
[Xerox Standard Accounting].
• The default user ID is "11111".
• The default passcode is "x-admin".