Fuji Xerox ApeosPort-IV C7780 Administrator's Manual page 629

13
Set the required items, and then select
[Sample Printout].
14
Select the tray in which you loaded paper in
step 1, and then press the <Start> button.
15
Measure the fold position with the sample printout, and adjust the fold position.
16
Adjust the items if necessary.
17
After you complete adjustment, print another sample printout with [Sample Printout]
and check the adjustment results.
18
Adjust the alignment again if necessary (steps 12 to 14).
19
Select [Save].
20
Select [Close] repeatedly until the [Adjust Fold Position] screen is displayed.
21
Select the tray to which to assign the set
type (the tray in which you loaded the paper
in step 1), and then select [Change
Settings].
22
Select the adjusted fold position type, and
then select [Save].
Fold Position Adjustment
629
16