Fuji Xerox ApeosPort-IV C7780 Administrator's Manual page 157

Tray 5 - Paper Size Defaults
Select the paper sizes displayed in the [Tray 5] screen in [Paper Supply] when copying with
Tray 5.
You can assign the paper size selected here to the buttons for [Standard Size] in the [Tray 5]
screen.
If you frequently use non-standard size paper for copying, assigning the paper sizes to the
buttons will save your time to specify the size each time. For your convenience, set the
commonly used paper sizes in the upper level.
A/B Series Size
You can select a paper size from A and B series sizes.
Inch Size
You can select a paper size from inch series sizes.
Others
You can select a paper size from other sizes.
Custom Size
You can enter any size. Set the X width between 148 and 488 mm, and the Y length between
100 and 330 mm in 1 mm increments.
Note • For open flap envelopes, enter the size with the flap size included.
Auto Tray Switching Control
Set the alternative tray or paper when running out of paper loaded in the tray selected.
Auto Tray Switching
You can select from [Enable during Auto Select] and [Enable for Same Paper Type/Color].
When [Enable during Auto Select] is selected, the machine switches the tray when [Auto
Select] is selected in the [Copy] screen or [Paper Select] of the print driver.
Note • The machine does not switch the tray automatically in the following cases:
- Tray 5 is selected.
- The tray set as [Auto Paper Off] is selected in [Paper Type Priority].
Targeted Paper Type (Copy Jobs)
You can select paper types.
When [According to Priority Assigned] is selected, the paper type is determined according to
the settings in [Paper Type Priority]. When selecting [Selected Paper Type Only], you can
specify the paper type.
Targeted Paper Color (Copy Jobs)
You can target all paper colors or only one paper color.
Image Quality
You can specify the image quality processing method for each of Plain, Recycled, Plain
Reload, Punched, Heavyweight, HW Reload, Punched HW1, Gloss, Gloss Reload, HW
Gloss, HW Gloss Reload, X-HW Gloss, X-HW Gloss Reload, Labels, X-HW Labels, Tab
Stock, and Custom Paper 1 to 5.
When copying or printing a document, the machine controls the image quality according to
the type of paper set in [Paper Tray Attributes] and the image quality processing method
specified for that type of paper.
The following table shows available settings.
For information about paper characteristics and notes, refer to "Loadable Quantity and Weight for
Supported Paper" (P.37).
Setting values
Plain A
Plain B
Meaning
Paper having a ream weight of 64 - 79 gsm.
Paper having a ream weight of 80 - 90 gsm.
Common Service Settings
157
5