Dtc Clearance - Suzuki 2006 SX4 Service Manual

DTC Clearance

Using SUZUKI Scan tool
1) Turn ignition switch to OFF position.
2) Connect SUZUKI scan tool to data link connector
(DLC) (1) located on underside of instrument panel
at driver's seat side.
Special tool
(A): SUZUKI scan tool
(A)
1
3) Turn ignition switch to ON position.
4) Erase DTC according to instructions displayed on
SUZUKI scan tool.
NOTE
To know how to use SUZUKI scan tool, refer
to operator's manual for SUZUKI scan tool.
5) After completing the clearance, perform "DTC
Check" and confirm if normal DTC (No code) is
displayed.
6) Turn ignition switch to OFF position, and then
disconnect SUZUKI scan tool from DLC.
Air Conditioning System: Automatic Type 7B-51
Not Using SUZUKI Scan Tool
S6RW0D7224005
1) Display history DTC by HVAC control module
referring to "Not Using SUZUKI Scan Tool" under
"DTC Check".
2) Press air intake selector (1) and "A/C" switch (2) at
the same time for 5 seconds or more.
3) After completing above Steps, turn ignition switch to
OFF position.
4) Perform "DTC Check" and confirm if normal DTC is
indicated.
I5RW0A722004-01
2 1
I5RW0A722007-01