Dtc B1362 / B1366: Curtain-Air Bag Circuit Low Resistance - Suzuki 2006 SX4 Service Manual

8B-79 Air Bag System:

DTC B1362 / B1366: Curtain-Air Bag Circuit Low Resistance

DTC B1362: Driver Curtain-Air Bag Circuit Low Resistance
DTC B1366: Passenger Curtain-Air Bag Circuit Low Resistance
Wiring Diagram
Refer to "DTC B1361 / B1365: Curtain-Air Bag Circuit High Resistance".
DTC Detecting Condition and Trouble Area
DTC detecting condition
DTC B1362:
Driver curtain-air bag circuit is less than 1.0 Ω for more
than 4 sec.
DTC B1366:
Passenger curtain-air bag circuit is less than 1.0 Ω for
more than 4 sec.
DTC Troubleshooting
Step
1 Was "Air Bag Diagnostic System Check Flow" performed?
2 Driver / passenger curtain-air bag circuit check
1) With ignition switch turned OFF, remove rear quarter
upper trim of applicable side and disconnect applicable
side curtain-air bag (inflator) module connector.
2) Check for proper connection to applicable side curtain-
air bag (inflator) module at terminals in "Q102" or "Q103"
connector.
3) If OK, then connect special tools (A), (B) and (C) to
applicable side curtain-air bag (inflator) module
connector.
Special tool
(A): 09932–76010
(B): 09932–75010
(C): 09932–78310
(C)
(B)
4) Check SDM for DTC.
With ignition switch turned ON, is DTC B1362 or B1366 still
indicated?
Action
"Q102", "Q103"
(A)
STEERING WHEEL
I7RW01822087-02
Trouble area
• Driver / passenger curtain-air bag circuit
• Driver / passenger curtain-air bag module
• SDM
Yes
Go to Step 2.
Go to Step 3.
S6RW0D8204063
No
Go to "Air Bag
Diagnostic System
Check Flow".
Replace side curtain-air
bag (inflator) module
referring to "Side
Curtain-Air Bag
(Inflator) Module
Removal and
Installation".