Dtc B1513: Temperature Control Actuator (Motor) And/Or Its Circuit Malfunction - Suzuki 2006 SX4 Service Manual

Step
5 Position sensor of temperature control actuator power
supply voltage check
1) Turn ignition switch to OFF position.
2) Disconnect connector from temperature control actuator.
3) Turn ignition switch to ON position.
4) Measure voltage between.
• Position sensor power supply terminal and position
sensor ground terminal of air flow control actuator
connector
• Position sensor signal terminal and position sensor
ground terminal of air flow control actuator connector
Is voltage 4.5 – 5.5 V?

DTC B1513: Temperature Control Actuator (Motor) and/or Its Circuit Malfunction

Wiring Diagram
2
[D]
GRY/BLU
GRY/RED
3
4
[D]: Temperature control actuator motor drive circuit
1. HVAC control module
DTC Detecting Condition and Trouble Area
Motor of temperature control actuator does not move longer than specified
time.
Action
1
12V
G20-1
G20-2
5V
5V
WHT G20-12
YEL G20-27
ORN G20-24
DTC Detecting Condition
Air Conditioning System: Automatic Type 7B-65
Check temperature
control actuator and its
circuit.
14 13 12 11 10 9 8
30 29 28 27 26 25 24
2. Temperature control actuator
3. To air flow control actuator
Yes
Substitute a known-
good HVAC control
module and recheck.
G20
7 6 5 4 3
23 22 21 20 19 18 17
4. To other sensors
Trouble Area
• Temperature control actuator circuit
• Temperature control linkage
• Temperature control actuator
• HVAC unit
• HVAC control module
No
S6RW0D7224015
2 1
16 15
I6RW0C722006-02