Suzuki 2006 SX4 Service Manual page 673

Scan tool data
At vehicle stop
SHIFT SOLENOID-
At 60 km/h (37.5 mile/h) constant speed, 20% or less
B COMMAND
throttle opening and 3rd gear ("3" range)
At vehicle stop
SHIFT SOLENOID-
At 60 km/h (37.5 mile/h) constant speed, 20% or less
B MONITOR
throttle opening and 3rd gear ("3" range)
Ignition switch ON and select lever is in "N" range
TIMING SOLENOID
For about 0.5 sec. while on gear shifting between 3rd
COMMAND
and 4th or gear shifting "N" to "D"
Ignition switch ON and select lever is in "N" range
TIMING SOLENOID
For about 0.5 sec. while on gear shifting between 3rd
MONITOR
and 4th or gear shifting "N" to "D"
At vehicle stop, closed throttle, engine idle speed and
TCC SOLENOID
1st gear
PRESSURE At vehicle stop, closed throttle, engine idle speed and
CONTROL SOLENOID 1st gear
VEHICLE SPEED At vehicle stop
"3" POSITION
Ignition switch ON
SWITCH
TRANSAXLE
Ignition switch ON
RANGE
D RANGE SIGNAL Ignition switch ON
THROTTLE
Ignition switch ON
POSITION
BRAKE SWITCH Ignition switch ON
While on gear upshifting with 25% or more throttle
TORQUE
opening
REDUCTION SIGNAL
Under condition of not shifting gear
ENGINE COOLANT
Ignition switch ON
TEMPERATURE
AIR CONDITIONER
Ignition switch ON and air conditioner switch OFF
SIGNAL
Engine running at idle speed and select lever is in "P"
range
SLIP RPM
Engine running, vehicle stop and select lever is in "D"
range
MIL REQUEST Ignition switch ON
Vehicle condition
Shift select lever to "3" or "2"
range
Shift select lever to other above
range
Select lever is in "P" position
Select lever is in "R" position
Select lever is in "N" position
Select lever is in "D" position
Select lever is in "3" position
Select lever is in "2" position
Select lever is in "L" position
Select lever is in "P" position
Select lever is in "R" position
Select lever is in "N" position
Select lever is in "D" position
Select lever is in "3" position
Select lever is in "2" position
Select lever is in "L" position
Accelerator pedal is depressed
Accelerator pedal is released
Brake pedal is depressed
Brake pedal is released
Automatic Transmission/Transaxle:
Normal condition / reference
values
0 km/h, 0 MPH
0 – 100% (Varies depending on
depressed value)
Engine coolant temperature is
displayed
0 RPM
Engine speed is displayed
5A-25
ON
OFF
ON
OFF
OFF
ON
OFF
ON
0%
0%
ON
OFF
P
R
N
D
D
2
L
OFF
ON
OFF
ON
ON
ON
ON
0%
ON
OFF
ON
OFF
OFF
OFF