Transaxle Rear Cover (O/D And 2Nd Coast Brake Piston) Assembly Components - Suzuki 2006 SX4 Service Manual

Hide thumbs Also See for 2006 SX4:

Table of Contents

2) Remove inner O-ring (1) and outer O-ring (2).

Transaxle Rear Cover (O/D and 2nd Coast Brake Piston) Assembly Components

1. Snap ring

2. O/D and 2nd coast brake return spring subassembly

3. O/D and 2nd coast brake piston front O-ring

4. O/D and 2nd coast brake piston rear O-ring

Automatic Transmission/Transaxle:

Reverse disassembly procedure for assembly, noting the

following points.

• Use new O-rings. Apply A/T fluid to the O-rings,

before installation.

• Install 2nd brake piston (1) to which A/T fluid is

applied to 2nd brake cylinder (2).

Do not damage O-ring when installing 2nd brake

I2RH0B510198-01

5. O/D and 2nd coast brake piston

6. Rear cover seal ring

7. Transaxle rear cover

8. Rear cover plug

I2RH0B510199-01

S6RW0D5106045

I5RW0C510063-01

9. Rear cover plug O-ring

: Apply automatic transaxle fluid.

: Do not reuse.

: 7.5 N⋅m (0.75 kgf-m, 5.5 lb-ft)

Table of Contents