Suzuki 2006 SX4 Service Manual page 996

7B-56 Air Conditioning System: Automatic Type
Scan Tool Data
COOLANT TEMP
SUN LOAD
MODE CONT
SWITCH
FAN CONT SWITCH
FAN DESIRED VOLT
AIR MIX POS SEN
MODE POS SENSOR
A/C CONT SIG
BLOWER LOAD SIG
AIR INTAKE MODE
REFRIGERANT
PRESSURE
A/C COMP CLUTCH
VEHICLE SPEED
ENGINE TYPE
METER SPEC
Scan Tool Data Definitions
TEMP CONT SWITCH: (Temperature control selector
position, Max Cool, °C / °F, Max Hot): This
parameter indicates the selected position of
temperature control selector.
CABIN TEMPERATURE: (In-car temperature, °C, °F):
This parameter indicates the in-car temperature
detected by inside air temperature sensor.
Condition
Ignition switch turned ON
Reference value depends on the situation
Ignition switch turned ON and air flow selector at
AUTO position
Ignition switch turned ON and blower speed selector
at AUTO position
Ignition switch turned ON and blower speed selector
at High
Ignition switch turned ON and blower speed selector
at Low
Ignition switch turned ON and temperature selector
at maximum cool position
Ignition switch turned ON and temperature selector
at maximum hot position
Ignition switch turned ON and air flow selector at
DEF position
Ignition switch turned ON and air flow selector at
VENT position
A/C switch turned ON, blower speed selector at other
than OFF position with engine running
A/C switch turned OFF with engine running
Ignition switch turned ON, blower speed selector at
other than OFF position
Ignition switch turned ON, blower speed selector at
OFF position
Ignition switch turned ON and air intake selector at
fresh air (FRE) position
Ignition switch turned ON and air intake selector at
recirculation air (REC) position
Ignition switch turned ON, air flow selector and
blower speed selector at AUTO position
A/C ON (A/C is operating) with engine running at
ambient temperature 30 °C (86 °F)
A/C OFF (A/C is not operating) with engine running
at ambient temperature 30 °C (86 °F) and engine
coolant temperature 90 °C (194 °F) – 100 °C (212
°F)
A/C switch turned ON, blower speed selector at other
than OFF position with engine running
A/C switch turned OFF with engine running
At stop with ignition switch turned ON
Ignition switch turned ON
Ignition switch turned ON
Normal Condition / Reference
Engine coolant temperature is
AUTO (Selected position of air flow
AUTO (Selected position of blower
speed selector is displayed)
1130 – 1560 kPa (For details, refer to
pressure of high pressure gauge
under "A/C System Performance
600 – 1000 kPa after longer than 10
minute for A/C switch turned off
Combination meter spec is displayed.
OUTSIDE AIR TEMP (Outside air temperature, °C,
°F): This parameter indicates the outside air
temperature detected by outside air temperature
sensor.
EVAPORATOR TEMP (Evaporator temperature, °C,
°F): This parameter indicates the temperature of air
passed through evaporator.
COOLANT TEMP (Engine Coolant Temperature °C,
°F): This parameter indicates the engine coolant
temperature detected by engine coolant temperature
sensor.
Value
displayed
0 W/m 2 – 1988 W/m 2
selector is displayed)
Approx. 12.0 V
Approx. 4.0 V
Approx. 0.5 V
Approx. 4.5 V
Approx. 4.5 V
Approx. 0.5 V
ON
OFF
ON
OFF
FRE
REC
AUTO
Inspection")
ON
OFF
0 km/h (0 mph)
Engine type is displayed.