Suzuki 2006 SX4 Service Manual page 1060

8B-21 Air Bag System:
Step
5 "AIR BAG" warning light circuit check
1) Connect SDM connector "L04" and combination meter
connector "G241".
2) With ignition switch turned ON, measure voltage
between "G241-5" terminal and body ground.
Special tool
(A): 09932–76010
"G241-5"
Is measured voltage in 8 – 12 V?
6 "AIR BAG" warning light circuit check
1) Disconnect combination meter connector "G241".
2) Measure voltage between "G241-5" terminal and body
ground.
Special tool
(A): 09932–76010
"G241-5"
Is measured voltage in 10 – 14 V?
NOTE
Upon completion of inspection and repair work, perform the following items.
• Reconnect all air bag system components and ensure all components are properly mounted.
• Repeat "Air Bag Diagnostic System Check" to confirm that the trouble has been corrected.
Action
(A)
I7RW01822008-01
(A)
I7RW01822008-01
Yes
Replace combination
meter.
Replace combination
meter.
No
Go to Step 6.
Replace SDM.