Suzuki 2006 SX4 Service Manual page 1379

• For motor operation in high speed
a. Connect battery positive (+) terminal to "2"
and its negative (–) terminal to terminal "5".
b. Check if motor revolution speed is as
specification. If check result is not as
specified, replace motor.
Specification
63 – 77 r/min (rpm)
[A]
2 5
[B]
2
5
[A]: LHD
[B]: RHD
• For automatic stop operation
a. Connect battery positive (+) terminal to
b. Disconnect terminal "1" from battery positive
c. Connect terminals "1" and "3" with a jumper
I5RW0A940009-01
[A]: LHD
[B]: RHD
2. Mark
d. Repeat Step a. to c. several times and check
Wipers / Washers:
terminal "1" and its negative (–) terminal to
terminal "5" and let the motor turn.
(+) terminal, and let the motor stop.
wire, and connect terminal "4" to battery
positive (+) terminal.
Observe the motor turns once again then
stops at a specified position as shown.
2
[A]
4
3
1
5
[B]
4
3
1
5
that the motor stops at the specified position
every time.
If check result is not satisfied, replace motor.
9D-5
I5RW0A940010-01