Suzuki 2006 SX4 Service Manual page 1096

8B-57 Air Bag System:
Step
3 Side-air bag circuit check
1) With ignition switch turned OFF, disconnect special tools
from applicable side-air bag (inflator) connector "Q104"
or "Q105".
2) Disconnect SDM connector "L04".
3) Check for proper connection to SDM connector at
terminal "L04-11" and "L04-12" (for DTC B1061) or
terminal "L04-13" and "L04-14" (for DTC B1065).
4) If OK, release shorting bar in SDM connector inserting
release tool (1) included in special tool (A).
Special tool
(A): 09932–76010
5) Measure resistance between "L04-12" and "Q105-1"
terminals, between "L04-11" and "Q105-2" terminals (for
DTC B1061).
6) Measure resistance between "L04-13" and "Q104-1"
terminals, between "L04-14" and "Q104-2" terminals (for
DTC B1065).
"Q104-1", "Q105-1"
"L04-11" "L04-12" "L04-13" "L04-14"
(A)
Is each measured resistance 1
Action
"Q104-2", "Q105-2"
1,(A)
"Q104", "Q105"
Ω
or less?
Yes
Substitute a known-
good SDM and recheck.
I7RW01822078-01
No
Go to Step 4.