Front Door Window Regulator Removal And Installation; Front Door Window Regulator Inspection - Suzuki 2006 SX4 Service Manual

9E-15 Glass / Windows / Mirrors:
• Install front door trim.
Front door trim attaching order
(1) → (2) → (3) → (4) → (5) → (6) → (7) → (8) → (9)
3
"A"
2
"A"
4
"A"
"A"
5
6
Front Door Window Regulator Removal and
Installation
NOTE
(For pinching prevention function model)
After replacing or disconnecting the driver
side door window regulator, make sure to
execute to the initial setting, (to have the
door glass closed position learned) refer to
"Power Window Main Switch Initialization
(Pinching Prevention Function Model)".
Removal
1) Remove door glass referring to "Front Door Glass
Removal and Installation".
2) Disconnect power window motor lead wire at
coupler.
3) Remove regulator mounting screws (1), and then
remove front door window regulator (2).
2
1
"A"
9
"A"
"A"
"A"
"A"
"A"
8
7
I5RW0A950020-02
S6RW0D9506011
1
I5RW0A950021-02
Installation
Reverse removal procedure noting the following
instruction.
• Apply grease to sliding portions of window regulator.
: Grease 99000–25011 (SUZUKI Super Grease A)

Front Door Window Regulator Inspection

NOTE
(For pinching prevention function model)
After replacing or disconnecting the driver
side door window regulator, make sure to
execute to the initial setting, (to have the
door glass closed position learned) refer to
"Power Window Main Switch Initialization
(Pinching Prevention Function Model)".
Check the following parts for wear, damage, smooth
operation and lubrication:
• Check regulator sliding and rotating parts.
• Check rollers.
S6RW0D9506012