Dtc B1081 / B1091: Side Impact-Sensor No Response; Dtc B1082 / B1092: Side Impact-Sensor Communication Data Invalid - Suzuki 2006 SX4 Service Manual

DTC B1081 / B1091: Side Impact-Sensor No Response

DTC B1081: Driver Side Impact-Sensor No Response
DTC B1091: Passenger Side Impact-Sensor No Response
DTC Detecting Condition and Trouble Area
DTC detecting condition
DTC B1081:
Driver side impact-sensor has been communicated with
no response for more than 4 sec.
DTC B1091:
Passenger side impact-sensor has been communicated
with no response for more than 4 sec.
DTC Troubleshooting
Step
1 Was "Air Bag Diagnostic System Check Flow" performed?
2 DTC check
1) Connect scan tool to DLC with ignition switch turned
OFF.
2) Turn ON ignition switch and check SDM for DTC.
Are there any DTCs B1083, B1084 (for DTC B1081) or
B1093, B1094 (for DTC B1091)?
NOTE
Upon completion of inspection and repair work, perform the following items.
• Reconnect all air bag system components and ensure all components are properly mounted.
• Clear DTCs referring to "DTC Clearance", if any.
• Repeat "Air Bag Diagnostic System Check" to confirm that the trouble has been corrected.

DTC B1082 / B1092: Side Impact-Sensor Communication DATA Invalid

DTC B1082: Driver Side Impact-Sensor Communication DATA Invalid
DTC B1092: Passenger Side Impact-Sensor Communication DATA Invalid
DTC Detecting Condition and Trouble Area
DTC detecting condition
DTC B1082:
Driver side impact-sensor has been communicated with
invalid data for more than 4 sec.
DTC B1092:
Passenger side impact-sensor has been communicated
with invalid data for more than 4 sec.
Action
Trouble area
• Driver / passenger side impact-sensor circuit
• Driver / passenger side impact-sensor
• SDM
Yes
Go to Step 2.
Go to applicable DTC
diag. flow.
Trouble area
• Driver / passenger side impact-sensor
• SDM
Air Bag System: 8B-70
S6RW0D8204066
No
Go to "Air Bag
Diagnostic System
Check Flow".
Replace defective side
impact-sensor and
recheck.
If this DTC still detected,
replace SDM.
S6RW0D8204058