Front Door Lock Assembly Inspection; Power Door Lock Switch Inspection (If Equipped); Door Key Cylinder Switch Inspection (If Equipped) - Suzuki 2006 SX4 Service Manual

Front Door Lock Assembly Inspection

• Check that door open and closes smoothly and
properly.
• Check that door stops in the secondary latched
position properly (preventing door from opening
freely) and that door closed completely in the fully
latched position.
• Adjust door latch striker position referring to "Front
Door Lock Assembly Removal and Installation", if
necessary.
Power Door Lock Switch Inspection (If
Equipped)
Check for continuity between terminals at each switch
position. If check result is not as specified, replace
switch.
1. Power door lock switch
Door Key Cylinder Switch Inspection (If
S6RW0D9606003
Equipped)
1) Remove front door trim referring to Step 1) to 3) of
"Front Door Glass Removal and Installation in
Section 9E".
2) Check for continuity between terminals at each
switch position. If check result is not as specified,
replace door lock assembly.
S6RW0D9606004
Right side switch terminals
Left side switch terminals
LOCK
OFF
UNLOCK
I6RW0C960003-01
Security and Locks: 9F-8
S6RW0D9606005
a b c d
b c d
c b a
I4RS0B960007-01