Rear End Door Assembly Components; Rear End Door Assembly Removal And Installation - Suzuki 2006 SX4 Service Manual

9J-6 Hood / Fenders / Doors:

Rear End Door Assembly Components

A B
A
[A]: Rear end door spoiler installation position
1. Rear end door panel assembly
2. Rear end door window glass
3. Rear end door hinge
: Apply lithium grease 99000-25011 to door hinge
moving section.
: Apply sealant 99000-31110 to contact face.
Rear End Door Assembly Removal and
Installation
WARNING
!
Be careful enough when you open and shut
with door balancer has not adhered to rear
end door.
Otherwise, Rear end door doses in weight
and is injured.
3
A
A
A
B
A
A
A A
6
S6RW0D9A06010
2
A
A
5
[A]
4. Rear end door balancer
5. Rear end door trim
6. Rear end door opening wether-strip
7. Rear end door spoiler
Removal
1) Remove rear end door trim (1).
2) Remove related section of head lining and rear trim.
3) Disconnect rear end door harness couplers (2) and
washer hose (3).
4) Remove rear end door balancers (4).
5) Remove door hinge nuts (5) and remove rear end
door assembly (6).
1
7
9
8
8. Cap
9. Clip
: 23 N⋅m (2.3 kgf-m, 17.0 lb-ft)
S6RW0D9A06009
(a)
4
(a)
I6RW0B9A0006-01