Auto Job Promotion; Offset Stacking (Finisher Tray) - Xerox 4112 System Administration Manual

X er o x 4 112 /4 1 27 C o pi e r /P r i n te r S y s te m A d mi n i st r a ti o n G u id e
Select the item to be set or changed, and select Change
2.
Settings.
NOTE: Select
to display the next screen.
Select the default setting.
3.
Select Save; you are returned to the Other Settings screen.
4.
Repeat Steps 1-4 for the selecting the default setting for any
5.
additional desired Other Settings items.
Select Close to return to the Common Settings screen.
6.
Select Close to return to the System Settings screen.
7.

Auto Job Promotion

This Other Settings option allows you set the machine to
automatically promote a job for printing/copying if the machine is
unable to start a prior job. For example, the machine is unable to
start an operation because there is no paper in the tray (at the
start of a copy or print operation). If this feature is enabled, then
the machine can bypass the current job and allows other jobs to
start.
KEY POINT: The other jobs must not have the same copy/print
requirements as the faulted job. If other jobs have different
copy/print requirements, then these other jobs can be promoted
and copied/printed.
NOTE: Stored documents such as secure prints and sample prints
are excluded and cannot be automatically promoted.

Offset Stacking (Finisher Tray)

Select the default offset stacking option for the finisher tray:
• None: If this option is selected, the finishing tray will not offset
any output.
• Offset per set: If this option is selected, the finishing tray will
to display the previous screen and select
8 . S e t ups
8-61