Removal; Installation; Vehicle Speed Sensor (Vss) - Buell XB 2010 Service Manual

HOME

VEHICLE SPEED SENSOR (VSS)

REMOVAL

1. Remove sprocket cover. See
2. Disconnect 3-place Deutsch connector [65] under sprocket
cover. See 6.29 SPROCKET COVER
3. See Figure 6-81. Remove fastener (1) to detach vehicle
speed sensor (2) from crankcase.

INSTALLATION

1. See Figure 6-81. Lubricate O-ring with engine oil and
install fastener (1) to attach vehicle speed sensor (2) to
crankcase and tighten to 90-110 in-lbs (10.0-12.4 Nm).
2. Connect vehicle speed sensor connector [65] to wiring
harness.
3. Install sprocket cover. See
2.36 SPROCKET COVER.
WIRING.
2.36 SPROCKET COVER.
sm00410
3
1. Fastener
2. Vehicle speed sensor
3. Rear isolator assembly
Figure 6-81. Speedometer Sensor
2010 XB Service: Electrical 6-67
6.24
2
1