Multi-Media Alarm Stations; Overview; Checklist To Configure A Multi-Media Alarm Station - Honeywell rapid eye System Administrator Manual

Multi-Media Alarm Stations

Overview

Flexibility in security
Like most Multi-Media security features, use of alarm stations is optional. A Multi-Media alarm
station can receive alarms from one Multi-Media unit or many.
Fig. 11–1. A Multi-Media Unit Can Send Alarms to a Specific PC.
Customizing a PC to be an alarm station
Admin is used to designate a PC as an alarm station. A Multi-Media unit that is set to trigger alarms
(see Events
SA) to send its alarms to a designated PC.
Where we are
Your Multi SA may prefer to add an alarm station after adding:
User accounts. Without users, only the Multi SA can use alarm stations. See
Account, on p. 159.
At least one site. Though a Multi SA can create alarm stations before sites, without a site an
alarm station cannot do much. See

Checklist to Configure a Multi-Media Alarm Station

1. Adding an Alarm Station: Name and
2. Identifying and Defining a
Document 800-02325 Rev A
07/08
Defined, on p. 193), can be directed by your Multi-Media System Administrator (Multi
Reports, p. 209.
Connection. An Alarm station can be reached over either:
Adding a Site, p. 23.
11
Creating a User
207