To Trace The Unit Sending The Alarm; To Set A Site To Not Report To A Specific Alarm Station - Honeywell rapid eye System Administrator Manual

Multi-Media Alarm Stations

To Trace the Unit Sending the Alarm

Either:
A View operator can make a note of the unit's serial number and IP address indicated in the
message.
A Multi SA can consult the alarm log.
Precaution
Before de-listing a Multi-Media unit or Multi unit from a Multi-Media database, Honeywell
recommends that your Multi SA use Admin software to remove Alarm Stations listed in a site
definition. See the procedure::

To Set a Site to Not Report to a Specific Alarm Station

1. Using Admin, click the Sites tab.
2. Double-click the name of the site that you plan to remove. An Update Site window is displayed.
3. Click
Call in Case of Alarms dialog box appears, displaying a list of alarm stations. Stations already
assigned to the site are listed the Report Alarms to column.
4. To move alarm station names to the Alarm Stations available column, either:
Select one or many station names in the Report Alarms to column, then click the left-arrow, or
Double-click the ones that you want to move.
5. Click Save and Close. The Add Site/Update Site dialog box reappears, listing the alarm stations in
the Report Alarms... pane.
6. You have the option of ending the site edit. To do so, click Save and Close. The Admin window
reappears, listing your system's sites on the Site tab.
7. Use View to start a
8. Click Update security on the Security tab of the Maintenance Session. Information from the Multi
db is copied to the Multi-Media unit. Please wait until "Updated security" appears in the Feedback
box.
9. Close the Maintenance Session.
10. Using Admin, remove the site.
11. Using View, click Refresh.
226
To Set a Site to Not Report to a Specific Alarm
in the "Report Alarms to these Alarms Stations" pane. The Add/Delete Stations to
Maintenance Session for the Multi-Media unit that you plan to remove.
Station, next.