To Customize The Rights In An Account - Honeywell rapid eye System Administrator Manual

To Customize the Rights in an Account

Fig. 9–3.
1. While adding or updating an account, click a box next to a right. See figure 9–3. Adding a
checkmark adds the right to the account; remove the checkmark to remove the right.
2. To limit camera access, see
3. After modifying rights, users of Admin need to click Save and Close. Users of LocalView do not.
If Central Management is enabled and the operator account will be used to operate the unit using
View software and LocalView, use View software to update security on the unit(s) to which the
account will grant access. See
Document 800-02325 Rev A
07/08
Defaults: User Account Rights (1) and Site Access (2).
To Limit Use of Cameras: Camera Partitioning
Updating Security on a Multi-Media
System Administrator Guide
on p. 189.
Unit, p. 133.
163