Downloading A Configuration File To An Acuix Dome Camera; Identifying The Model Of The Camera; Upgrading The Firmware Of An Acuix Dome Camera - Honeywell rapid eye System Administrator Manual

Save. Copies a file from the Rapid Eye unit to the operator's PC. See
Configuration File to a
Delete. Select a file and click. A confirmation dialog box appears. Click Yes to remove the file from
the Rapid Eye unit. This does not remove the information from an ACUIX dome camera.
Refresh. Updates the report in the Manage Files dialog box.
Close. Closes the Manage Files dialog box.
Using LocalView
A configuration file for an ACUIX dome camera can also be saved to a Rapid Eye unit, using
LocalView. See the context-sensitive Help for LocalView.

Downloading a Configuration File to an ACUIX Dome Camera

After Backing Up an ACUIX Configuration File to a
another ACUIX camera of the same make and model.
1. Run a Maintenance
2. On the Serial tab, select the port to which the Intellibus device was assigned.
3. Click Discover to update the table of ACUIX dome cameras.
4. Select one ACUIX camera or many. There is a shortcut to select all of the cameras listed: click the
checkbox in the Name column; see figure 6–14.
5. Click Download to Camera. A standard Windows dialog appears, showing the drives and folders
available on the operator's PC.
6. Select a configuration file (*.bin) for the ACUIX dome camera.
7. Click Open. The configuration file is downloaded to the ACUIX dome camera.
Do not upload an ACUIX configuration file from one model of ACUIX dome camera to
another. For example, the configuration from an ACUIX dome camera with a FCB-EX480C
camera should not be uploaded to an ACUIX dome camera with a VK-S654 camera. To
identify a camera, see the procedure for

Identifying the Model of the Camera

Honeywell recommends identifying the model of the camera in ACUIX dome cameras, to avoid
uploading an ACUIX configuration file from one model of ACUIX camera to another.
1. Run a Maintenance
2. Click the Video tab.
3. Click PTZ.
4. Select a camera that is an ACUIX dome camera.
5. Click Camera Menu. The model of the camera is listed.

Upgrading the Firmware of an ACUIX Dome Camera

1. Run a Maintenance
Document 800-02325 Rev A
07/08
PC, step 8, above.
Session.
Identifying the Model of the
Session.
Session.
System Administrator Guide
Backing Up an ACUIX
PC, p. 100, you can copy that configuration to
Camera, next.
101