Common Network; Fig. 3-6. Setting-Up A Common Network Connection; Fig. 3-7. Operating A Rapid Eye Unit Using A Network Connection - Honeywell rapid eye System Administrator Manual

See also
Connection

Common Network

Use a common network connection on a network without DHCP. For DHCP, see
Configuration
Fig. 3–6.
While Working with Connections
1. In the Add Connection window, click "Use existing Network Connection".
2. In IP Address, type the static IP address that was assigned to the unit by your network
administrator or installer.
3. You have the option of typing in Connection Name, to rename the connection.
4. Click Save and Close. For a report, see
Fig. 3–7.
Document 800-02325 Rev A
07/08
Report, p. 46.
Protocol, p. 32.
Setting-up a Common Network Connection.
(p. 29):
Operating a Rapid Eye Unit Using a Network Connection.
Connection Report, p. 46.
System Administrator Guide
Dynamic Host
31