Limiting The Time That A Unit Can Be Used; To Limit Use Of Cameras: Camera Partitioning - Honeywell rapid eye System Administrator Manual

Limiting the Time that a Unit Can Be Used

Fig. 10–9. Account's Limit on Session Time, before Needing to Reconnect.
Limiting time can be used to prevent users from monopolizing a Rapid Eye site's maintenance.
See figure 10–9, above.

To Limit Use of Cameras: Camera Partitioning

You can disallow access to some or all cameras at a site. By default, a user account can use every
camera at a site.
Why deny access to a camera? This depends on your organization's security protocols.
Tip
Perhaps an operator should monitor some cameras and not others.
You need to have configured cameras at a site before you can limit their use in a user's account.
To configure cameras, see Cameras, on p. 65.
1. Using Admin, click the Users tab.
2. Display the Update User dialog box by either:
Double-clicking the name of the user account that you want to update.
- or -
Selecting the user account that you want to update; then: click either:
Update on the Actions menu, or press the F12 key.
Document 800-02325 Rev A
07/08
System Administrator Guide
on the toolbar,
189