Refreshing A Local Database; To Refresh A Local Database While Running View - Honeywell rapid eye System Administrator Manual

Multi Database
The PC can run Admin or View. View's Log On window automatically displays the database
selected to run Admin.
3. Leave a checkmark in the checkbox next to The Central database is accessible from this PC. You
should uncheck this box after one successful logon only if a PC is stand alone or mobile. Leave or
type your user account name in the User ID box.
4. Type your password in the Password box.
5. Click OK.
For routine use of View
Unless another Multi db is set, View continues to use the same Multi db, every time that someone
logs on.
Tip
For PCs running Admin and View, View's Log On window automatically displays the
database selected using Admin.
The User ID and Password are authenticated once in the Multi db; afterwards, the local database
is used.
Local Multi database
The local db contains a subset of the Central db data: the information for sites that the user is
authorized to use.

Refreshing a Local Database

Purpose
If changes are made to the Central Multi database, and it is accessible from the PC running View,
the local database is refreshed automatically when you login to View. Security and site information
is updated.
The local database can be refreshed by View Operators, at the request of a Multi SA, for:
PCs that run View 24/7
- or -
PCs that are stand-alone and only occasionally connected to a Multi Central database.

To Refresh a Local Database while Running View

1. Run View. At the Logon, check if there is a checkmark in the checkbox next to The Central
database is accessible from this PC.
If so, proceed with the logon.
If not, check with your Multi SA if the PC used to run View can connect to the PC or server
holding the Multi Central database. In the affirmative, check the checkbox next to The Central
database is accessible from this PC.
2. While View is running, operators can either:
250