Local User Management; Central User Management - Honeywell rapid eye System Administrator Manual

Users

Local User Management

Creating accounts using either LocalView...
Local User Management enables a Multi SA to create operator accounts onsite, using LocalView,
for operating that unit only. When user management is set to "Local" in LocalView, the list of
accounts on that unit can be edited.
... or Admin software
In addition, a Multi SA can create Rapid Eye accounts using Admin software while Local User
Management is in force. These "standard" Rapid Eye accounts are used to access one or many
units remotely, from a PC running View software.
Setting a centrally managed unit to Local User Management
A LocalView administrator has the option of setting User Management to "Local". Accounts that
were created centrally remain on the unit.

Central User Management

Creating accounts using Admin software
Central User Management disables only the onsite creation of operator accounts, using LocalView.
If Central User Management is in effect, a Multi SA uses Admin software to create accounts. These
"central" accounts can access Multi-Media units using View software or LocalView.
Fig. 9–1.
158
Button for Changing User Management from Local to Central.