To Assign A Schedule To A Camera, Or Group Of Cameras; Using A 15-Minute Increment In A Schedule - Honeywell rapid eye System Administrator Manual

Enhancing Video for Security
Customizing the "Default" schedule
By default, all of a Multi-Media unit's cameras and alarms are assigned to the "Default" schedule.
Customizing the "Default" schedule can be the quickest way to coordinate a unit for all cameras
and alarms.

To Assign a Schedule to a Camera, or Group of Cameras

1. Continue or start a
2. Click the Schedules tab.
3. Click Continuous. The tab displays a list of cameras, along with a schedule grid. See figure 7–4.
4. Select a camera in the Name column. If Always On is selected, select Use Schedule.
5. Click the Use Schedule box and select a schedule for the group of cameras.
6. Repeat this procedure for the other cameras that will use the schedule selected in step 5.
Renaming cameras
Cameras can be renamed on the Video tab. See figure

Using a 15-minute Increment in a Schedule

Fig. 7–5.
1. In the Time/Day grid, on a day's row, right-click an hour's cell to display a menu.
2. Click the 15' Breakdown command. A 15' Breakdown window appears, showing four fifteen-minute
cells for that hour, on that day. See figure 7–5.
3. Click on the cells as needed to schedule one or many of the fifteen-minute periods.
4. To save the setting, click OK. The 15' Breakdown window disappears.
108
Maintenance Session.
Breakdown of a Cell into Fifteen-minute Sections.
5–1 on p. 65, in Cameras.