Dial-Up Connection; Fig. 3-14. Using A Direct Connection To Operate A Multi-Media Unit; Fig. 3-15. Adding A Dial-Up Connection; Table 3-2 Ip Defaults Used By Multi-Media Units - Honeywell rapid eye System Administrator Manual

Setting up a Connection to a Rapid Eye Unit
Fig. 3–14. Using a Direct Connection to Operate a Multi-Media Unit.
1. Using Microsoft Windows, set the IP Address on the PC's network card to an address on the same
subnet as the Rapid Eye unit, as shown in table 3–2. To change a PC's IP addresss, see your
Microsoft Windows documentation.
2. Using Admin software, add a connection as for a
Table 3–2 IP defaults used by Multi-Media Units
Point
IP Address
Subnet Mask

Dial-up Connection

Fig. 3–15. Adding a Dial-up Connection.
38
Common
Rapid Eye unit Operator's PC
(default address) (network card)
172.25.2.1 172.25.1.1
255.255.0.0 255.255.0.0
Network; see p. 31.