Setting up a Connection to a Rapid Eye Unit
Working with Connections
Coordinating with the installer
If a connection was set up by the installer and you are accessing the Multi db created by the
installer, the connection will be listed in "Connections to the Site". See figure 3–4. One connection,
or many, can be setup; for example, to operate a unit through a network, and by local dial-up.
Using Admin software
Admin software is used to set up, or modify, a connection to a Rapid Eye unit. Figure
how to add a connection; do so while
connection is made using View software.
Fig. 3–4.
Document 800-02325 Rev A
07/08
Updating a Site
Adding a Dial-up Connection to a Site Record.
(p. 25), or while
Adding a Site
3
3–4
shows
(p. 23). A
29