Live Video; Simultaneous Use Of Many Units By One Operator; Table 8-9 Camera Groups - Honeywell rapid eye System Administrator Manual

Live Video

Limitation on viewing live video in many Live sessions
When live video is monitored, use of live video from cameras from the same group of cameras,
cannot total more than 8.
The groups of cameras are defined in table 8–9.
For example:
Let 2 operators view live video from 3 cameras in group C (3 cameras × 2 operators = 6 live
streams). A third operator can view live video using only 2 of the cameras in group C.
Let 8 operators, each running a live session, use the same live camera. A ninth operator cannot
view live video using a camera from the same group.
Table 8–9 Camera Groups.
Group
A
B
C
D

Simultaneous Use of Many Units by One Operator

Up to 64 simultaneous connections to different units can be made by one operator. Note that this
number can be lower due to the CPU of the PC that runs View, the PC's memory and the number
of other tasks running.
Audio broadcast
Audio can be broadcast to many units simultaneously, using View software. To broadcast: click
Talk in more than one player before using the microphone at the operator's PC.
Document 800-02325 Rev A
07/08
Camera port (#)
1, 8, 11, 14
2, 5, 12, 15
3, 6, 9, 16
4, 7, 10, 13
System Administrator Guide
153