Alarm Log; Viewing The Log; To View The Log - Honeywell rapid eye System Administrator Manual

Alarm Log

During an alarm session, a record of the event that caused the alarm is entered in the Alarm Log of
the Multi central database (Multi db).

Viewing the Log

Fig. 13–1. Alarm Log.
The alarms produced in the last 24 hours are listed when the log is opened. The log can appear to
be empty. Earlier alarms can be viewed by filtering (as in

To view the log

Do one of the following:
Click
Click "Alarm Log" on the Actions Menu
Press the F11 key.
Using LocalView, click View Log on the Setup tab.
Document 800-02325 Rev A
07/08
on the Admin toolbar
Filtering the Log, below).
13
233