Ras Connection To An Alarm Station - Honeywell rapid eye System Administrator Manual

Multi-Media Alarm Stations

RAS Connection to an Alarm Station

Fig. 11–12. A Multi-Media Unit Can Send Alarms through a RAS Server.
In a nutshell
A Rapid Eye site may need to connect to a remote access service (RAS) server to reach a Multi
alarm station. Figure
first (1); PPP authentication occurs. Alarms can then reach the alarm station using the unit's
IP address (2).
Fig. 11–13. RAS Configuration.
222
11–13 shows a telephone number to a server's modem. The number is dialed