Updating A Site; To Rename A Site; Fig. 3-3. Report Of A Dynamic Ip Assigned By Dhcp To A Rapid Eye Unit - Honeywell rapid eye System Administrator Manual

System Tab of a Maintenance session
On the System tab of a
site definition, when using a connection on a DHCP-enabled network. The LocalView Site Name
name is used; see
Fig. 3–3.

Updating a Site

Double-click a site name. The Update Site dialog appears.

To Rename a Site

1. Type in the Site Name box, as needed.
2. Click Save and Close. This updates the name of the Rapid Eye unit on the Sites tab in View
software.
Note
Document 800-02325 Rev A
07/08
Maintenance Session, the Site Name can differ from the Site Name in a
Dynamic Host Configuration
Report of a Dynamic IP Assigned by DHCP to a Rapid Eye Unit.
For connections using DHCP, a different "site name" is shown on the System tab
of a Maintenance Session. Do not change that "site name"; it serves a different
purpose. See Dynamic Host Configuration
System Administrator Guide
Protocol, p. 32.
Protocol, p. 32.
25