For The Multi Sa Only: Admin And View Software; First Use: Running Admin Software; Fig. 1-2. To Install Admin Software, Run The Multi-Media Admin Cd-Rom; Fig. 1-3. Desktop Icon For Admin Software - Honeywell rapid eye System Administrator Manual

For the Multi SA Only: Admin and View Software

The system administrator of your Rapid Eye system (Multi SA) needs Admin software and View
software. Use the Admin CD-ROM that came with your unit to install both. If security is important
to your organization, Honeywell recommends that the Admin CD-ROM be used only on the PC of
your organization's Multi SA.
Fig. 1–2.

First Use: Running Admin Software

The purpose of Admin software is to manage information in a Multi db. On first use, starting Admin
software is as simple as:
1. Double-click the Admin icon, shown in figure 1–3. The Rapid Eye Multi-Media Admin - Logon
window appears.
2. If "Administrator" is not in the User ID box, type it.
3. Click OK .
Fig. 1–3.
Rapid Eye central database
A Rapid Eye central database (Multi db) contains information about:
Each Rapid Eye site. Network and dial-up communication settings for each Multi-Media DSP
unit. See
Operator accounts. For
user accounts, see p. 155.
Rapid Eye alarm stations. PCs that receive alarms from Rapid Eye units. See
Alarm
Site tours. Setup of lists of sites and time spent at each. Site tours work only if your
organization has two Multi-Media DSP units, or more. See
And so on.
Document 800-02325 Rev A
07/08
To Install Admin Software, Run the Multi-Media Admin CD-ROM.
Desktop Icon for Admin software.
Setting up a Connection to a Rapid Eye
Users of View software and Admin software, including passwords to
Stations, p. 207.
System Administrator Guide
Unit, p. 29.
Touring Many Sites, p. 227.
Multi-Media
21