Touring Many Sites; Preliminary Checklist - Honeywell rapid eye System Administrator Manual

Touring Many Sites

Purpose
A Rapid Eye Multi system can be set to show all of the video and data from a series of sites, one
site at a time, automatically. This a common use of a CCTV security system. Admin is used to
setup one or more tours. View is used to run site tours.
See also
A site tour, involving many Rapid Eye sites is very different from other types of tours, such as:
PTZ tour. One camera; one site. See
camera to a preset position.
LocalView tour. Using LocalView to tour many cameras at one site. See the LocalView online
help.
Public display monitor. Many cameras at one site. Using a monitor connected to one Multi-
Media unit. See

Preliminary Checklist

Before defining a site tour
Your Multi System Administrator (Multi SA) needs at least two sites to define a tour. See
Site, on p. 23. For systems using one site only, a Live session is as effective as a Site tour. See the
Remote View Operator Guide.
Tip
A site tour is not listed in View until more than one site is assigned to it.
Design a site tour using two or more Rapid Eye units.
System password
The System Password
See p. 172.
Document 800-02325 Rev A
07/08
Pan, Tilt, and Zoom (PTZ) Setup
Public Display Monitor: Using Monitor Output
should be the same for the Rapid Eye sites selected for a site tour.
12
to see how to set a PTZ-
1, p. 142.
Adding a
227