View: Setting The Db; To Set A Multi Db For View - Honeywell rapid eye System Administrator Manual

Tip
To log on to Admin, use either:
(a) the Administrator account, or
(b) an account with the "Use settings from Administrator" property.
The "first use" exception
On first use, you are offered an empty, default Multi database. To obtain a Multi central database,
see Obtaining a Multi Db

View: Setting the Db

Fig. 14–7. The Log On to View.
The first time that you use View...
The View operator needs to set View to use a Multi central database (Multi db).
Tip
For mobile PCs that will not have access to the Multi db, have the multi SA connect the PC
at least once to the Multi db and have that user log on.
When a different Multi db is used at View's logon, the local db is overwritten with contents from the
most recent Multi db.

To Set a Multi Db for View

1. Start View.
2. Set the database. Either:
The PC can only run View. Select the database engine and type or browse for the name of the
database file. For SQL Server or MSDE databases, indicate the server and database.
Document 800-02325 Rev A
07/08
on p. 238.
System Administrator Guide
249