Offering Many Dial-Up Connections To The Same Unit; Many Connections To A Unit; Table 3-3 Multiple Dial-Up Connections: Decision Chart - Honeywell rapid eye System Administrator Manual

a Multi-Media unit and an alarm station running View are explained in
Alarm Station, on p. 214.

Offering Many Dial-Up Connections to the Same Unit

More than one dial-up connection to the same Multi-Media unit may be needed. Table
configurations, and the number of connections for best results. For example, Windows Dial-Up
Networking can give unwanted results when some View operators are inside the Multi-Media unit's
local calling area and others are outside. Telephone companies can also force a Multi SA to setup
an irregular local call—a local call across area codes.
Table 3–3 Multiple Dial-up Connections: Decision Chart
Operator's
PC (location)
in unit's
calling area
outside unit's
calling area
some in,
some out of
unit's calling
area
in another
country
some out of
site's country

Many Connections to a Unit

Depending on your organization's needs, there can be a mix of network and dial-up connections.
One dial-up connection can be simultaneous with many network connections.
Tip
Setting up many connections is optional.
Document 800-02325 Rev A
07/08
Call to Unit
(type)
local
irregular long distance:
same area code
irregular long distance:
local call
long distance
irregular local call: not
requiring area code
permutations of all of
the above
international long
distance
all permutations
System Administrator Guide
Dial-up Connection to an
Procedure
(name, page)
Dial-up Connection, p. 38
Area Code: Irregular Use, p.
Dial-up Connection, p. 38 &
Code: Irregular Use, p. 39
Dial-up Connection, p. 38
Area Code: Irregular Use, p.
Dial-up Connection, p. 38
& Area Code: Irregular Use, p.
Dial-up Connection, p. 38
Dial-up Connection, p. 38 &
Code: Irregular Use, p. 39
3–3 lists
Connections
(number of)
1
1
39
Area 2
1
39 1
from 2 to 4
39
1
Area from 2 to 5
41