To Set The Date Of A Retrieval Using The Calendar Utility; Results; To Print A Log Entry; System Failure - Honeywell rapid eye System Administrator Manual

Security for a Multi-Media System

To Set the Date of a Retrieval Using the Calendar Utility

1. In the Stream List dialog box, display the calendar utility by clicking the arrow next to the date box.
2. Click a date in the calendar. To go to another month, click the arrow keys next to the month/year
heading in the utility.
You cannot go beyond the limits of the log
Attempting to input or select dates or times beyond the limits of the log sets the input to that limit.

Results

You can use the search results to:
View video from the time of events located by a search.
Print the log entry of an event
Make a copy of the log entry in a *.txt file.

To Print a Log Entry

1. After locating records of events, as explained above, in
select a record. The Print button becomes available.
2. Click Print.
3. Click OK. A Font dialog box appears. Select a font. Click OK.

System Failure

A Multi-Media unit can be monitored for:
Failure to function
Failure to record video.
You can set the FAULT RELAY to trigger when these failures last nineteen minutes. An alarm panel
or other external device can be preset to warn your organization, if failure occurs. A power failure
also triggers the relay, but does so immediately.
A system failure is not a Multi event but it can trigger Multi events; see
200
Event Session: to Search the Log of
System Monitor
Events,
on p. 136.