Enhancing Video for Security
Event Recording for Video: Scheduling a Response
The Response schedule is used to make simple if-then-and-when rules, to preset how a Multi-
Media unit responds to events of interest. For example, figure
[Trigger:] =
[Response:] =
[Schedule:] =
business hours between 7 am and 7 pm.
Fig. 7–8.
Trigger: an Event of Interest
An empty loading dock may become of interest when motion occurs. A Response Rule presets a
unit to respond to Events of interest, such as:
Motion in video.
Lost video.
An input, activated.
Data from a POS device.
A Honeywell Video Analytics event or alarm.
Displaying the Response Panel Used for Making Rules
1.
Continue or start a
2.
Click the Schedules tab. See figure 7–8.
112
If a camera senses motion...
... then a Multi-Media DSP unit responds with
... however, do not do so during business hours. When? On weekdays, during
A Rule's Trigger, Response and Schedule.
Maintenance Session
7–8
shows:
Event
for the Rapid Eye site.
Recording. And...