Video Feed Setup
Cameras
Automatic detection
A Multi-Media unit detects cameras that are powered and connected to it, when the unit is
powered or rebooted.
Fig. 5–1.
Renaming a Camera
1.
Continue or start a
2.
On the Video tab, select the name of a camera in the Name column. Cameras have default names
of "Camera1", "Camera2", and so on.
3.
Click the name of the camera once more; a box appears around the name. See figure 5–1.
4.
Type a new name. There is a limit of 40 characters.
5.
Press the Enter key.
Document 800-02325 Rev A
07/08
The Video Tab: Camera Names and Image Settings.
Maintenance Session
(p. 51).
5
65