Multi-Media Alarm Stations; Overview; Checklist To Configure A Multi-Media Alarm Station - Honeywell Rapid Eye Administrator's Manual

Multi-Media Alarm Stations

Overview

Checklist to Configure a Multi-Media Alarm Station

Document 800-02953V4 Rev A
03/10
Like most Multi-Media security features, use of alarm stations is optional. A Multi-Media
alarm station can receive alarms from one Multi-Media unit or many.
Customizing a PC to be an Alarm Station
Use the Admin application to designate a PC as an alarm station. A Multi-Media unit that
is set to trigger alarms (see
Multi-Media System Administrator (Multi SA) to send its alarms to a designated PC (alarm
station).
Note You should have user accounts and at least one site configured before setting
up an alarm station. You will need users to use the alarm station and a site to
send the alarms.
1. Adding an Alarm Station Name and Reports
2. Identifying and Defining a Connection
reached over either a:
• Network Connection to an Alarm
• Dial-Up Connection to an Alarm
3. Making an Alarm Station Operational
Events Defined on page 205), can be directed by your
on page 218.
on page 219. An Alarm station can be
Station, page 221, or
Station, page 224.
on page 233.
11
217